Waste Management

Parker 351TC and 351ST constant working pressure hoses: Spec your cover style for 4,000 psi half-bend radius hose applications

Parker’s 351 hose offers you a choice of abrasion-resistant covers: Tough Cover (TC) for tough environments, and Super Tough cover (ST) for severe applications. So now it’s easier than ever to match the right hose to your specific application.

• Choose your hose cover – Tough Cover or Super Tough cover
• Oil-resistant Nitrile-based synthetic rubber tube provides media compatibility for a variety of fluids
• 4,000 psi constant working pressure in all sizes
• One-half minimum SAE 100R1 bend radius
• No-Skive design eliminates the need to remove the cover before crimping

Construction
351TC – Oil-resistant, Nitrile-based synthetic rubber tube; multiple braids of high-tensile steel wire reinforcement; oil-, weather-, and abrasion-resistant, MSHA-accepted black synthetic rubber cover.

351ST – Oil-resistant Nitrile-based synthetic rubber tube; multiple braids of high-tensile steel wire reinforcement; oil-, weather-, and a high abrasion resistant black polymeric cover.

• Petroleum-base hydraulic fluids and lubrication oils within a temperature range of -40°F to +212°F (-40°C to +100°C)
• Water, water/oil emulsion and water/glycol hydraulic fluids up to +185°F (+85°C)• Air up to +158°F (+70°C)

Parker 721TC Extreme hose pushes the envelope in high-pressure applications where space is tight.

Critical high-pressure applications in limited spaces call for extreme measures. That’s the time to measure off a few lengths of Parker’s new 721TC Extreme hose. With its one-half SAE 100R12 minimum bend radius and abrasion-resistant Tough Cover, 721TC Extreme hose allows you to use less hose while it guards against hose-to-hose and hose-to-object abrasion. No matter how demanding the environment – construction, forestry, agriculture, mining, you name it – 721TC Extreme hose is the one that keeps your equipment working hard.

• One-half SAE 100R12 minimum bend radius means you use less hose
• Specially engineered Tough Cover compound resists abrasion in aggressive environments
• Up to 4000 psi working pressure
• No-Skive design eliminates the need to remove the cover before crimping
• Unique three-color layline makes hose easy to identify

Construction
Oil-resistant synthetic rubber inner tube; four spirals of high-tensile steel wire reinforcement; oil-, weather-, and abrasion-resistant black synthetic MSHA-accepted rubber cover.

• Petroleum-base hydraulic fluids and lubricating oils within a temperature range of -40°F to +257°F (-40°C to +125°C)
• Water, water/oil emulsion and water/glycol hydraulic fluids up to +185°F (+85°C)
• Air up to +158°F (+70°C); for air above 250 psi (1,7 MPa), the cover should be pin pricked

For more information please call the Value Added Shawano office at 1-888-823-8351 or e-mail us at vadwebsales@vadtek.com